Android Jelly Bean 4.2.2 v1.1 firmware installed on Pipo S1 tablet

Here is the easiest to do this firmware update:
1. Download Android Jelly Bean 4.2.2 v1.1 firmware image from: link1 or link2.
2. Put your Pipo S1 in 'firmware update mode'.
3. Run Rockchip Batch Tool v1.7, select the proper image .img file from your desktop, and after your device is found by the program, press the 'Restore' button and wait for 2-3 minutes to finish. The first boot is very long, wait about 5-7 minutes.

What we have at the moment:
- Firmware 4.2.2 from PIPO S1S
- Removed Chinese applications
- Added root
- Default language English
- Customise kernel
- G-sensor is operating
- Camera is working
- HDMI output is working
- Antutu produces about 11.647 points
- Wifi Display Miracast support

Credits for this firmware go to realmaple.



1. To install the CWM 6.0.2.7 please follow the update steps from this post. Then download CWM 6.0.3.1 from here or from here and copy it as it is on a micro SD card, install Quick Boot free from Play store, reboot into recovery, then choose 'install zip from sd card' and apply the new CWM zip file from your card. Enjoy CWM 6.0.3.1 on your tablet!

2. To install NAND fix. First download 1_RK30_JB_Format_NAND.zip from here, here or here. Copy it on micro SD card, install Quick Boot free from Play Store, run it and boot into recovery. Install zip from SD card and reboot. You're done!

Enjoy this firmware release, share is love!  

 Always keep in mind that this is not a review, just a first sight of this firmware. You have to test it more for another details, to see if it satisfies your needs.