Intex Aqua Y2 Pro Privacy Protection password removed done 100% tested
This flash file is factory, you can use when your device hang on logo problem, restarting problem, security lock problem, password lock problem, calling problem etc software related problem then you can use this flash file but remember before you use this flash so some impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.
SP_Flash_Tool_v5.1343.01 download from here
Required for Privacy lock remove:
1. Intex Aqua Y2 Pro device with battery charged
2. Intex Aqua Y2 Firmware or Tool
3. Micro usb cable
4. Computer or Laptop
Procedure:
1. Download Firmware or tool from above link
2. Open Flash tool and choose Format menu
3. Choose Auto Format flash
4. Choose second option Format whole flash except Bootloader
5. Click on Start Button
6. Press and hold Boot key and insert usb cable
7. Wait until full format device (see below image done format in flash tool)
8. Now Choose Download Option
9. Click on Scatter-loading button and choose scatter file
10. Choose Download only button
11. Click on Download button
12. Press and hold boot key and insert usb cable
13. You are done from Privacy protection password
Note : If use this tutorial so your device imei lost
Screenshot:
0 comments:
Post a Comment