Intex Aqua T4 MT6571 Flash done in Flash tool with Firmware or Tools free download HERE
Intex Aqua T4 Model image :
About This tutorial:
This tutorial tested or also firmware tested just you need to following one by one. If you have this device and in that problem like hang on logo, pattern lock, screen lock, restarting problem, or other software related problem so just use this tutorial and also use here put firmware link but remember you can't save your data like contacts, image, videos or other data because this is full factory reset with flash so remember that and also must your device battery charged up to 70%, if any customer coming with above device first check hardware like shorting problem after try in flash because some device to be shorting then you can try to flash then your mobile goes to dead mode so remember also first check hardware after try in flash with this tested firmware so let's go how to flash Intex Aqua T4.
Required for Flash:
1. Intex Aqua T4 device with battery charged
2. Intex Aqua T4 Firmware with tested
3. Micro USB cable
4. Computer or Laptop
Procedure:
1. Open Smart flash tool and click on scatter button
2. Choose Scatter file
3. Select COM and click on ahead box
4. Click start button
5. Press and Hold Volume Up Button and insert usb cable
6. When connect your device with tools then you can see tools like below image
7. Below second image of flashing processing
8. When your flash done then disconnect your device and take out battery
9. Insert again battery and try to start device
10. You are done
0 comments:
Post a Comment